diff --git a/apps/server/src/assets/doc_notes/en/User Guide/User Guide/Installation & Setup/Server Installation/1. Installing the server/Packaged version for Linux.html b/apps/server/src/assets/doc_notes/en/User Guide/User Guide/Installation & Setup/Server Installation/1. Installing the server/Packaged version for Linux.html index 4fd608881..52566a4a0 100644 --- a/apps/server/src/assets/doc_notes/en/User Guide/User Guide/Installation & Setup/Server Installation/1. Installing the server/Packaged version for Linux.html +++ b/apps/server/src/assets/doc_notes/en/User Guide/User Guide/Installation & Setup/Server Installation/1. Installing the server/Packaged version for Linux.html @@ -59,6 +59,102 @@ WantedBy=multi-user.target
  • You can now open a browser to http://[your-server-hostname]:8080 and you should see the Trilium initialization page.
    • +

    Simple Autoupdate for Server

    +

    Run as the same User Trilium runs

    +

    if you run as root please remove 'sudo' from the commands

    +

    requires "jq" apt install jq +

    +

    It will stop the service above, overwrite everything (i expect no config.ini), + and start service It also creates a version file in the Trilium directory + so it updates only with a newer Version

    #!/bin/bash
+
+# Configuration
+REPO="TriliumNext/Trilium"
+PATTERN="TriliumNotes-Server-.*-linux-x64.tar.xz"
+DOWNLOAD_DIR="/var/tmp/trilium_download"
+OUTPUT_DIR="/opt/trilium"
+SERVICE_NAME="trilium"
+VERSION_FILE="$OUTPUT_DIR/version.txt"
+
+# Ensure dependencies are installed
+command -v curl >/dev/null 2>&1 || { echo "Error: curl is required"; exit 1; }
+command -v jq >/dev/null 2>&1 || { echo "Error: jq is required"; exit 1; }
+command -v tar >/dev/null 2>&1 || { echo "Error: tar is required"; exit 1; }
+
+# Create download directory
+mkdir -p "$DOWNLOAD_DIR" || { echo "Error: Cannot create $DOWNLOAD_DIR"; exit 1; }
+
+# Get the latest release version
+LATEST_VERSION=$(curl -sL https://api.github.com/repos/$REPO/releases/latest | jq -r '.tag_name')
+if [ -z "$LATEST_VERSION" ]; then
+  echo "Error: Could not fetch latest release version"
+  exit 1
+fi
+
+# Check current installed version (from version.txt or existing tarball)
+CURRENT_VERSION=""
+if [ -f "$VERSION_FILE" ]; then
+  CURRENT_VERSION=$(cat "$VERSION_FILE")
+elif [ -f "$DOWNLOAD_DIR/TriliumNotes-Server-$LATEST_VERSION-linux-x64.tar.xz" ]; then
+  CURRENT_VERSION="$LATEST_VERSION"
+fi
+
+# Compare versions
+if [ "$CURRENT_VERSION" = "$LATEST_VERSION" ]; then
+  echo "Latest version ($LATEST_VERSION) is already installed"
+  exit 0
+fi
+
+# Download the latest release
+LATEST_URL=$(curl -sL https://api.github.com/repos/$REPO/releases/latest | jq -r ".assets[] | select(.name | test(\"$PATTERN\")) | .browser_download_url")
+if [ -z "$LATEST_URL" ]; then
+  echo "Error: No asset found matching pattern '$PATTERN'"
+  exit 1
+fi
+
+FILE_NAME=$(basename "$LATEST_URL")
+FILE_PATH="$DOWNLOAD_DIR/$FILE_NAME"
+
+# Download if not already present
+if [ -f "$FILE_PATH" ]; then
+  echo "Latest release $FILE_NAME already downloaded"
+else
+  curl -LO --output-dir "$DOWNLOAD_DIR" "$LATEST_URL" || { echo "Error: Download failed"; exit 1; }
+  echo "Downloaded $FILE_NAME to $DOWNLOAD_DIR"
+fi
+
+# Extract the tarball
+EXTRACT_DIR="$DOWNLOAD_DIR/extracted"
+mkdir -p "$EXTRACT_DIR"
+tar -xJf "$FILE_PATH" -C "$EXTRACT_DIR" || { echo "Error: Extraction failed"; exit 1; }
+
+# Find the extracted directory (e.g., TriliumNotes-Server-0.97.2-linux-x64)
+INNER_DIR=$(find "$EXTRACT_DIR" -maxdepth 1 -type d -name "TriliumNotes-Server-*-linux-x64" | head -n 1)
+if [ -z "$INNER_DIR" ]; then
+  echo "Error: Could not find extracted directory matching TriliumNotes-Server-*-linux-x64"
+  exit 1
+fi
+
+# Stop the trilium-server service
+if systemctl is-active --quiet "$SERVICE_NAME"; then
+  echo "Stopping $SERVICE_NAME service..."
+  sudo systemctl stop "$SERVICE_NAME" || { echo "Error: Failed to stop $SERVICE_NAME"; exit 1; }
+fi
+
+# Copy contents to /opt/trilium, overwriting existing files
+echo "Copying contents from $INNER_DIR to $OUTPUT_DIR..."
+sudo mkdir -p "$OUTPUT_DIR"
+sudo cp -r "$INNER_DIR"/* "$OUTPUT_DIR"/ || { echo "Error: Copy failed"; exit 1; }
+echo "$LATEST_VERSION" | sudo tee "$VERSION_FILE" >/dev/null
+echo "Files copied to $OUTPUT_DIR"
+
+# Start the trilium-server service
+echo "Starting $SERVICE_NAME service..."
+sudo systemctl start "$SERVICE_NAME" || { echo "Error: Failed to start $SERVICE_NAME"; exit 1; }
+
+# Clean up
+rm -rf "$EXTRACT_DIR"
+echo "Cleanup complete. Trilium updated to $LATEST_VERSION."

    Common issues

    Outdated glibc

    Error: /usr/lib64/libstdc++.so.6: version `GLIBCXX_3.4.21' not found (required by /var/www/virtual/.../node_modules/@mlink/scrypt/build/Release/scrypt.node)
     at Object.Module._extensions..node (module.js:681:18)
diff --git a/apps/server/src/assets/doc_notes/en/User Guide/User Guide/Installation & Setup/Server Installation/1. Installing the server/Using Docker.html b/apps/server/src/assets/doc_notes/en/User Guide/User Guide/Installation & Setup/Server Installation/1. Installing the server/Using Docker.html
index 60e5d049e..53b131799 100644
--- a/apps/server/src/assets/doc_notes/en/User Guide/User Guide/Installation & Setup/Server Installation/1. Installing the server/Using Docker.html	
+++ b/apps/server/src/assets/doc_notes/en/User Guide/User Guide/Installation & Setup/Server Installation/1. Installing the server/Using Docker.html	
@@ -1,6 +1,6 @@
 
    Official docker images are published on docker hub for AMD64, ARMv7 and ARM64/v8:
   https://hub.docker.com/r/triliumnext/notes/
+  href="https://hub.docker.com/r/triliumnext/trilium/">https://hub.docker.com/r/triliumnext/trilium/
 
    
 
    Prerequisites
    
 
    Ensure Docker is installed on your system.
    
@@ -15,7 +15,7 @@
       mounting your SMB share.
    
 
 
    Running with Docker Compose
    
-
    Grab the latest docker-compose.yml:
    wget https://raw.githubusercontent.com/TriliumNext/Notes/master/docker-compose.yml
    
+
    Grab the latest docker-compose.yml:
    wget https://raw.githubusercontent.com/TriliumNext/Trilium/master/docker-compose.yml
    
 
    Optionally, edit the docker-compose.yml file to configure the
   container settings prior to starting it. Unless configured otherwise, the
   data directory will be ~/trilium-data and the container will
@@ -26,7 +26,7 @@
 
    Pulling the Docker Image
    
 
    To pull the image, use the following command, replacing [VERSION] with
   the desired version or tag, such as v0.91.6 or just latest.
-  (See published tag names at https://hub.docker.com/r/triliumnext/notes/tags.):
    docker pull triliumnext/notes:v0.91.6
    
+  (See published tag names at https://hub.docker.com/r/triliumnext/trilium/tags.):
    docker pull triliumnext/trilium:v0.91.6
    
 
    Warning: Avoid using the "latest" tag, as it may automatically
   upgrade your instance to a new minor version, potentially disrupting sync
   setups or causing other issues.
    
@@ -37,7 +37,7 @@
 
    Local Access Only
    
 
    Run the container to make it accessible only from the localhost. This
   setup is suitable for testing or when using a proxy server like Nginx or
-  Apache.
    sudo docker run -t -i -p 127.0.0.1:8080:8080 -v ~/trilium-data:/home/node/trilium-data triliumnext/notes:[VERSION]
    
+  Apache.
    sudo docker run -t -i -p 127.0.0.1:8080:8080 -v ~/trilium-data:/home/node/trilium-data triliumnext/trilium:[VERSION]
    
 
      
   
    1. Verify the container is running using docker ps.
      2. 
   
    2. Access Trilium via a web browser at 127.0.0.1:8080.
      3. 
@@ -45,20 +45,20 @@
 
      Local Network Access
      
 
      To make the container accessible only on your local network, first create
   a new Docker network:
      docker network create -d macvlan -o parent=eth0 --subnet 192.168.2.0/24 --gateway 192.168.2.254 --ip-range 192.168.2.252/27 mynet
      
-
      Then, run the container with the network settings:
      docker run --net=mynet -d -p 127.0.0.1:8080:8080 -v ~/trilium-data:/home/node/trilium-data triliumnext/notes:-latest
      
+
      Then, run the container with the network settings:
      docker run --net=mynet -d -p 127.0.0.1:8080:8080 -v ~/trilium-data:/home/node/trilium-data triliumnext/trilium:-latest
      
 
      To set a different user ID (UID) and group ID (GID) for the saved data,
-  use the USER_UID and USER_GID environment variables:
      docker run --net=mynet -d -p 127.0.0.1:8080:8080 -e "USER_UID=1001" -e "USER_GID=1001" -v ~/trilium-data:/home/node/trilium-data triliumnext/notes:-latest
      
+  use the USER_UID and USER_GID environment variables:
      docker run --net=mynet -d -p 127.0.0.1:8080:8080 -e "USER_UID=1001" -e "USER_GID=1001" -v ~/trilium-data:/home/node/trilium-data triliumnext/trilium:-latest
      
 
      Find the local IP address using docker inspect [container_name] and
   access the service from devices on the local network.
      docker ps
 docker inspect [container_name]
      
 
      Global Access
      
-
      To allow access from any IP address, run the container as follows:
      docker run -d -p 0.0.0.0:8080:8080 -v ~/trilium-data:/home/node/trilium-data triliumnext/notes:[VERSION]
      
+
      To allow access from any IP address, run the container as follows:
      docker run -d -p 0.0.0.0:8080:8080 -v ~/trilium-data:/home/node/trilium-data triliumnext/trilium:[VERSION]
      
 
      Stop the container with docker stop <CONTAINER ID>,
   where the container ID is obtained from docker ps.
      
 
      Custom Data Directory
      
-
      For a custom data directory, use:
      -v ~/YourOwnDirectory:/home/node/trilium-data triliumnext/notes:[VERSION]
      
+
      For a custom data directory, use:
      -v ~/YourOwnDirectory:/home/node/trilium-data triliumnext/trilium:[VERSION]
      
 
      If you want to run your instance in a non-default way, please use the
-  volume switch as follows: -v ~/YourOwnDirectory:/home/node/trilium-data triliumnext/notes:<VERSION>.
+  volume switch as follows: -v ~/YourOwnDirectory:/home/node/trilium-data triliumnext/trilium:<VERSION>.
   It is important to be aware of how Docker works for volumes, with the first
   path being your own and the second the one to virtually bind to. https://docs.docker.com/storage/volumes/ The
   path before the colon is the host directory, and the path after the colon
@@ -89,10 +89,10 @@ docker inspect [container_name]

    If you're unsure, stick to the “rootful” Docker image referenced above.

    Below are some commands to pull the rootless images:

    # For Debian-based image
-docker pull triliumnext/notes:rootless
+docker pull triliumnext/trilium:rootless
 
 # For Alpine-based image
-docker pull triliumnext/notes:rootless-alpine
    +docker pull triliumnext/trilium:rootless-alpine

    Why Rootless?

    Running containers as non-root is a security best practice that reduces the potential impact of container breakouts. If an attacker manages to @@ -117,13 +117,13 @@ TRILIUM_UID=$(id -u) TRILIUM_GID=$(id -g) docker-compose -f docker-compose.rootl TRILIUM_DATA_DIR=/path/to/your/data TRILIUM_UID=$(id -u) TRILIUM_GID=$(id -g) docker-compose -f docker-compose.rootless.yml up -d

    Using Docker CLI

    # Build the image
-docker build -t triliumnext/notes:rootless -f apps/server/Dockerfile.rootless .
+docker build -t triliumnext/trilium:rootless -f apps/server/Dockerfile.rootless .
 
 # Run with default UID/GID (1000:1000)
-docker run -d --name trilium -p 8080:8080 -v ~/trilium-data:/home/trilium/trilium-data triliumnext/notes:rootless
+docker run -d --name trilium -p 8080:8080 -v ~/trilium-data:/home/trilium/trilium-data triliumnext/trilium:rootless
 
 # Run with custom UID/GID
-docker run -d --name trilium -p 8080:8080 --user $(id -u):$(id -g) -v ~/trilium-data:/home/trilium/trilium-data triliumnext/notes:rootless
+docker run -d --name trilium -p 8080:8080 --user $(id -u):$(id -g) -v ~/trilium-data:/home/trilium/trilium-data triliumnext/trilium:rootless

    Environment Variables